Viper remote start systems are a convenient way to start your car from a distance, especially on cold days or when you’re carrying your arms full of groceries. But what if your Viper remote start suddenly stops working?
There are a few things you can do to troubleshoot the problem and try to fix it yourself.
1. Check the batteries in your remote.
This is the most obvious thing to check, but it’s also the most common cause of problems with remote start systems. If the batteries are weak or dead, your remote won’t be able to communicate with your car’s starter.
To check the batteries, simply open up the remote and remove them. If they’re corroded or leaking, replace them immediately. Suppose they look good, try putting them in a different remote to see if they work. If they don’t, then the batteries are the problem.
2. Make sure you’re in range.
Viper remote start systems have a limited range, so it’s important to make sure you’re close enough to your car when you try to start it. If you’re too far away, your remote won’t be able to reach the car.
Most Viper remote start systems have a range of about 1,000 feet. However, this can vary depending on the model of your system and the environment you’re in. If you’re in a rural area with few obstacles, you may be able to start your car from further away. But if you’re in an urban area with lots of buildings and other structures, you’ll need to be closer.
3. Check the antenna.
The antenna on your Viper remote start system is what allows it to communicate with your car’s starter. If the antenna is damaged or not properly connected, your remote start system won’t work.
To check the antenna, simply inspect it for any signs of damage. If it’s broken or bent, you’ll need to replace it. If it looks good, make sure it’s properly connected to the remote start system’s control unit.
4. Check the fuses.
There are a few fuses that control the Viper remote start system. If any of these fuses are blown, the system won’t work.
To check the fuses, consult your car’s owner’s manual. The owner’s manual will tell you which fuses control the remote start system and where they’re located. Once you’ve found the fuses, use a fuse tester to see if they’re blown. If any of the fuses are blown, replace them immediately.
5. Try reprogramming the remote.
If you’ve checked all of the above and your Viper remote start system is still not working, you may need to reprogram the remote.
To reprogram the remote, consult the instructions that came with your remote start system. The instructions will tell you how to reprogram the remote for your specific car.
6. Contact Viper support.
If you’ve tried all of the above and your Viper remote start system is still not working, you may need to contact Viper support for assistance.
Viper support can help you troubleshoot the problem and determine if your system needs to be repaired or replaced.
If you’re not comfortable troubleshooting the problem yourself, you can always take your car to a qualified mechanic. They will be able to diagnose the problem and fix it for you.
Additional tips for troubleshooting your Viper remote start system:
Here are some additional tips for troubleshooting your Viper remote start system:
- If you’re having trouble starting your car, try using the key to start it instead. This will help you to determine if the problem is with the remote start system or with the car itself.
- If you’re able to start your car with the key, but it won’t start with the remote start system, then the problem is most likely with the remote start system.
- If you’re not sure how to troubleshoot the problem yourself, consult your car’s owner’s manual or contact Viper support.
Most common causes of Viper remote start problems:
Here are some of the most common causes of Viper remote start problems:
- Dead or weak batteries in the remote
- Out of range of the car
- Damaged or disconnected antenna
- Blown fuse
- Improperly programmed remote
- A problem with the remote start system’s control unit
- A problem with the car’s starter or ignition system
If you’re having trouble with your Viper remote start system, don’t panic. There are a few things you can do to troubleshoot the problem and try to fix it yourself. If you’re not comfortable troubleshooting the problem yourself, you can always take your car to a qualified mechanic.
Conclusion:
If you’re having trouble with your Viper remote start system, there are a few things you can do to troubleshoot the problem and try to fix it yourself.
First, check the batteries in your remote. If they’re weak or dead, replace them immediately.
Second, make sure you’re in range. Viper remote start systems have a limited range, so you need to be close enough to your car when you try to start it.
Third, check the antenna. The antenna on your Viper remote start system is what allows it to communicate with your car’s starter. If the antenna is damaged or not properly connected, your remote start system won’t work.
Fourth, check the fuses. There are a few fuses that control the Viper remote start system. If any of these fuses are blown, the system won’t work.
Fifth, try reprogramming the remote. If you’ve checked all of the above and your Viper remote start system is still not working, you may need to reprogram the remote.
Finally, if you’re not comfortable troubleshooting the problem yourself, you can always contact Viper support or take your car to a qualified mechanic.
In most cases, you can fix a Viper remote start problem yourself by following the tips above. However, if you’re still having trouble, don’t hesitate to contact a professional for help.
FAQs:
1: Why is my Viper remote start not working?
There are a few reasons why your Viper remote start might not be working. The most common causes are:
- Dead or weak batteries in the remote
- Out of range of the car
- Damaged or disconnected antenna
- Blown fuse
- Improperly programmed remote
- A problem with the remote start system’s control unit
- A problem with the car’s starter or ignition system
2: How do I reset my Viper remote start?
To reset your Viper remote start, follow these steps:
- Turn the key to the ON position.
- Within five seconds, press and release the Control Button one time.
- Within five seconds, press and hold the Control Button.
- Press the button (or the single button) on the remote control.
- The horn (if connected) honks to confirm the remote has been programmed.
3: How do I reprogram my Viper remote start?
To reprogram your Viper remote start, follow the instructions that came with your remote start system. The instructions will tell you how to reprogram the remote for your specific car.
4: What do I do if my Viper remote start still doesn’t work after I’ve tried all of the troubleshooting steps?
If you’ve tried all of the troubleshooting steps above and your Viper remote start system is still not working, you may need to contact Viper support or take your car to a qualified mechanic.
I hope these FAQs help you to troubleshoot your Viper remote start problem.